Stainless Steel Brake Line Set, 66-77 Ford Bronco SKU: 3191

Our stainless steel brake line sets will replace every hard line on your early Bronco. These brake line sets also include hard lines to replace the brake hoses that run from the master cylinder to the proportioning or junction valve. These CNC bent brake line kits have the same fittings as the stock hard lines and are designed to bolt into the stock locations. Made in the USA.

Early Bronco Stainless Steel Brake Line Set Options:

• 1966 Ford Bronco
  For use with factory single reservoir master cylinder, Dana 30 front end, manual drum brakes
  
  
• 1967-71 Ford Bronco
  For use with factory dual reservoir master cylinder, Dana 30 front end, manual drum brakes
  
  
• 1971-75 Ford Bronco
  For use with factory dual reservoir master cylinder, Dana 44 front end, manual drum brakes
  
  
• 1976-77 Ford Bronco
  For use with factory dual reservoir master cylinder, Dana 44 front end, manual front disc brakes
  
  
• 1976-77 Ford Bronco
  For use with factory dual reservoir master cylinder, Dana 44 front end, power front disc brakes
  
  

Note: If you have disc brakes with a proportioning valve on a 66-75 Bronco, we suggest purchasing our #3077 custom brake hose kit to go from the master cylinder to the prop valve. If you are using a stock master cylinder you will need one adapter to fit these lines. If you are using our power brake kit or our heavy duty master, you will not need any adapters. Slight bending of new lines may be required during installation. If you have a modified (non-stock) brake system some of the lines may not fit without the use of adapters.