Your Cart (0)
Extended Rear Center Brake Hose for Lift, Braided Stainless,66-77 Bronco SKU: 1473
Extended Rear Center Brake Hose for Lift, Braided Stainless,66-77 Bronco
Rear Center Brake Hose for Lift 66-77 Bronco
Product Overview:
These are the hoses that go from the frame to the top of the rear differential. Our stainless steel braided hose has a clear jacket with printed lay lines. The clear jacket protects the S.S. hose and keeps out the dirt and grime that causes ordinary S.S. hoses to deteriorate quicker. With each hose assembly we use rubber support inserts between the coupler and hose. This enables the assembly to function properly under constant movement and vibration. One hose needed per Bronco. Approximately 24" overall length.
Built to DOT Specifications
Everybody claims to have DOT "approved" or "certified" brake hoses, but do they? WH felt you should know that the Department of Transportation has accepted and recorded WH's designation symbol "*359" which was submitted in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106, Brake hoses. This symbol is crimped into each of our OEM style end fittings, as required by Standard No. 106 and identifies Wild Horses Inc. as the manufacturer of the brake hose assemblies you see here. We manufacture our stainless steel hose assemblies using state of the art equipment with the highest quality materials available. Bottom line is WH brake hose assemblies are made to the specifications set forth by the Federal Motor Vehicle Safety Standard No. 106, Brake hoses. Put our hose assemblies side by side with the generic ones from others and you will see a big difference in the materials, quality and construction.
Full description
These are the hoses that go from the frame to the top of the rear differential. Our stainless steel braided hose has a clear jacket with printed lay lines. The clear jacket protects the S.S. hose and keeps out the dirt and grime that causes ordinary S.S. hoses to deteriorate quicker. With each hose assembly we use rubber support inserts between the coupler and hose. This enables the assembly to function properly under constant movement and vibration. One hose needed per Bronco. Approximately 24" overall length.
Everybody claims to have DOT "approved" or "certified" brake hoses, but do they? WH felt you should know that the Department of Transportation has accepted and recorded WH's designation symbol "*359" which was submitted in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106, Brake hoses. This symbol is crimped into each of our OEM style end fittings, as required by Standard No. 106 and identifies Wild Horses Inc. as the manufacturer of the brake hose assemblies you see here. We manufacture our stainless steel hose assemblies using state of the art equipment with the highest quality materials available. Bottom line is WH brake hose assemblies are made to the specifications set forth by the Federal Motor Vehicle Safety Standard No. 106, Brake hoses. Put our hose assemblies side by side with the generic ones from others and you will see a big difference in the materials, quality and construction.
Built to DOT Specifications
Everybody claims to have DOT "approved" or "certified" brake hoses, but do they? WH felt you should know that the Department of Transportation has accepted and recorded WH's designation symbol "*359" which was submitted in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106, Brake hoses. This symbol is crimped into each of our OEM style end fittings, as required by Standard No. 106 and identifies Wild Horses Inc. as the manufacturer of the brake hose assemblies you see here. We manufacture our stainless steel hose assemblies using state of the art equipment with the highest quality materials available. Bottom line is WH brake hose assemblies are made to the specifications set forth by the Federal Motor Vehicle Safety Standard No. 106, Brake hoses. Put our hose assemblies side by side with the generic ones from others and you will see a big difference in the materials, quality and construction.
Our stainless steel braided hoses are engineered to deliver unmatched performance and durability for your Bronco’s front differential. Designed to connect from the frame to the top of the differential, these hoses feature a protective jacket with printed lay lines that effectively guard against the dirt and grime that commonly cause premature wear in standard stainless steel hoses. Each assembly incorporates support inserts between the coupler and hose, ensuring optimal functionality under the constant movement and vibration that off-road conditions demand. With a precise 24-inch length, this hose is a critical component for maintaining the integrity and reliability of your Bronco's drivetrain.
California residents: Proposition 65 Warning
Q&A
Have a question? Click Here to submit your question.
Asked by Daniel Carr, April 22, 2020
Q: Are these end connections compatible with standard -3 AN fittings?
⮞ 1 Answer
Answered by ☆ sales - April 22, 2020
A: No. These accept a standard 3/16 brake line, 3/8-24 inverted flare connection.
Asked by Anonymous, December 3, 2013
Q: Will these work with a 6.5 lift, and what is the length overall.
⮞ 1 Answer
Answered by ☆ 8578 - December 4, 2013
A: Over all length is 24 should work for 6.5 lift on 66-77 Bronco. We can make you custom lengths if you determine you need something different.
PRODUCT REVIEWS
Shop popular categories
5 stars