FlowKooler Water Pump, 289/302/351W V8, 66-77 Ford Bronco SKU: 5015

FlowKooler Water Pump, 289/302/351W V8, 66-77 Ford Bronco

FlowKooler Water Pump 289/302/351W V8 66-77 Bronco

Product Overview:

FlowKooler water pumps unique impeller designs prevent engine overheating through higher flow rates. Gasket included.

Full description

FlowKooler water pumps unique impeller designs prevent engine overheating through higher flow rates. Gasket included.

FlowKooler Early Bronco Water Pump

FlowKooler hi flow water pumps resolve low-speed heating problems by doubling flow rates at low rpm and idle (which is perfect for off-roading). CNC precision machined impellers feature larger diameters, increased vane count, tighter clearances, shrouding and porting. These unique design features help drop engine temperatures up to 30 degrees, increase the block pressure to prevent hot spots on cylinder walls and stop the formation of steam pockets in the block all while delaying the onset of cavitation at higher rpm.

Impellers are protected from electrolysis and corrosion with a Type II Class II Military Grade anodized surface coating. From 0-3,000 rpms…Nothing Beats a FlowKooler!

Independent testing by a major engineering university and the world's largest automotive manufacturer has proven FlowKooler pumps outperform all other makes at low speeds. One more added bonus is that the aluminum water pump weighs considerably less than its cast iron counterpart.

California residents: Proposition 65 Warning

NEED HELP? Talk to a BRONCO expert today! (209) 400-7200

PRODUCT REVIEWS

Rod hester

Reviewed 08/29/2024

The casting at the bottom near the hose outlet was left with extra material. I got lucky and noticed it was rubbing the harmonic balancer before I installed the fan and rad and started it up. I had to remove it and grind some off to clearance it. Needless to say I had to get new gaskets as they had already set up. Locally it is taking a week to get the gaskets. Yes I sent photos to Wild Horses.

Shawn Malcom

Reviewed 06/22/2024

As always never disappointed with wild horses products. This water pump drops the temp around 20 degrees on all my builds. Pair it with the Robert Shaw high flow thermostat and you’ll run cool.

damian

Reviewed 03/24/2022

I replaced my aging Edelbrock water pump with the Flowkooler pump. I was impressed with the way the internals looked and so far it works as good if not better than the Edelbrock (and not nearly as expensive) Wont know for sure till I go on a long drive but so far its great.

Anthony A.Gohde

Reviewed 10/05/2018

Easy install,Fits really well, 12 degrees cooler coolant temperature

Matt

Reviewed 02/20/2016

Good flow, lightweight, easy install

Tim H

Reviewed 06/30/2015

Very nice water pump and seems to cool better at low RPM's than my old Milodon pump.

Bob

Reviewed 06/04/2015

Dropped engine temp about 20 degrees. Quality product

Christain

Reviewed 05/25/2015

Works as advertised couldn't be happier

toyotatrd4x4

Reviewed 04/15/2015

Use this with a high flow thermostat and get a 5 inch water pump pulley from summit racing from march performance. Without underdriving the water pump pulley and the high flow thermo this is just almost your basic water pump. I rate it very good with corresponding parts

Mark Sanders

Reviewed 01/14/2020

Arrived in a timely manner, easy to install and works great. I recommend it as an OEM upgrade/replacement.

riggermortis

Reviewed 05/20/2012

I recently purchased a flowkooler water pump the customer service was great! The shipping was fast! The water pump works but there was very little difference in cooling if any for daily driving. Hopefully it will be more noticeable out on the trail.

Toby

Reviewed 08/28/2011