4-wheel Power Disc Brake Kit, 67-75 Ford Bronco SKU: 2991NET

Early Bronco 4-Wheel Power Disc Brake Kit | 1967–75 Ford Bronco

If you’re looking for the ultimate, all-in-one braking solution for your early Bronco, this is it. Our 4-Wheel Power Disc Brake Master Kit is the most complete system on the market. Designed to give your Bronco modern stopping power with all the pieces you need, this full conversion covers every corner of your brake system — front and rear disc brakes, power booster, proportioning valve, stainless lines and hoses, locking hubs, and all hardware included.

No need to chase down individual parts or wonder if components will work together. We’ve built this kit to be the complete bolt-on solution for safer, stronger, and more confident braking performance. Plus, you get premium stainless steel hard lines and hoses for lasting performance and corrosion resistance.

• Complete Brake System Upgrade:
  Everything you need in one kit — no hunting for extra parts.

• Full Front & Rear Disc Brakes:
  Includes calipers, rotors, pads, hardware, and e-brake cables.

• Power Brake Conversion:
  Vacuum-assist power booster and master cylinder deliver serious stopping force.

• Mile Marker Locking Hubs Included:
  Adds convenience and performance for your front axle.

• Stainless Steel Lines & Hoses:
  Corrosion-resistant for long-lasting, reliable performance.

• Proportioning Valve & Fittings:
  Balanced braking control front to rear.

• All Hardware Included:
  Spindle nut kits, brackets, small parts — everything you need.

Kit Includes the Following: 

• #3005 Front Disc Brake Kit with Wheel Bearings, Prop Valve & Bracket and Hardware
• #3061 Rear Disc Brake Kit with E-Brakes
• #3050 Power Brake Kit
• #8826 Mile Marker Locking Hubs
• #8845 Spindle Nut Kit (Qty 2)
• #9202 Spindle Nut Socket
• #3191 Stainless Steel Hard Brake Line Kit
• #3077 Stainless Steel Braided Master Cylinder to Valve Hose Kit
• #1462 Front Stainless Steel Braided Frame to Diff Hose
• #1473 Rear Stainless Steel Braided Frame to Diff Hose
• Miscellaneous Small Parts and Hardware.

Installation Notes:

• Bolt-On Installation with Minimal Fabrication: This brake system is engineered for your Ealry Bronco, and is primarily a bolt-on system. However, you will need to weld on the rear disc brake line mounting tabs. You may also find it necessary to relocate the rear lower shock mount in some applications.

• Note on Wheel Clearance: If you are running stock 15" steel wheels, this kit will require wheel spacers. There were two different widths of wheels that came stock on the early Bronco. If you have 5.5" wide wheels, you will need 1/2" spacers and longer studs for caliper clearance. If you have factory 6" wide wheels, you will need 1/4" spacers and should be able to get away using your stock studs.

• Check Fitment Before Paint/Powdercoat: Make sure everything fits properly before final finishing!

All-in-one power disc brake kit for your Early Bronco! Front & rear discs, power booster, stainless lines & hardware for ultimate stopping power.