Your Cart (0)
Lift Block Kit w/U-Bolts, 2.75 to 3.5 inch Lift, 78-79 Ford Bronco SKU: 791499
Lift Block Kit w/U-Bolts, 2.75 to 3.5 inch Lift, 78-79 Ford Bronco
Lift Block Kit w/U-Bolts 2.75" or 3.5" Lift 78-79 Bronco
Product Overview:
Looking to give your Early Bronco a little extra altitude in the rear without going all-in on new springs? Our Lift Block Kit is a simple, cost-effective way to add 2.5 or 3 inches of lift. It’s a great choice for street-driven Broncos or those looking to level out their stance without sacrificing ride quality. Built from durable steel with a built-in taper to help correct pinion angle, this kit is tougher than your average budget block setup. Whether you're finishing up a build or just want a little more clearance, this kit gets the job done without breaking the bank.
Full description
Looking to give your Early Bronco a little extra altitude in the rear without going all-in on new springs? Our Lift Block Kit is a simple, cost-effective way to add 2.5 or 3 inches of lift. It’s a great choice for street-driven Broncos or those looking to level out their stance without sacrificing ride quality. Built from durable steel with a built-in taper to help correct pinion angle, this kit is tougher than your average budget block setup. Whether you're finishing up a build or just want a little more clearance, this kit gets the job done without breaking the bank.
Rear Lift Block Kit w/ U-Bolts | 2.5" or 3" Lift | 78-79 Ford Bronco
Need a little extra height in the rear without breaking the bank? Our Lift Block Kit for the 78-79 Ford Bronco is a solid, budget-friendly solution for street-driven rigs looking to level out or match a front suspension lift.
We don’t mess with cheap cast or aluminum blocks that crumble under pressure—these are heavy-duty steel blocks built to last. Each block includes a built-in taper to help correct pinion angle, which helps reduce driveline vibrations. Whether you’re going with a 2.5” or 3” lift, the kit includes high-strength U-bolts, washers, and nuts to get you squared away.
What’s Included:
- (2) Steel Lift Blocks (2.5" or 3" height)
- (4) U-Bolts
- Nuts & Washers
Fitment Note:
If you're running Wild Horses rear springs, you may need to slightly drill out the top hole in the block to fit the larger center pin.
- Perfect for budget builds or street cruisers.
- Not recommended for extreme off-road or trail use.
Ready to give your Bronco a quick rear-end boost? This kit keeps it simple, solid, and affordable.
California residents: Proposition 65 Warning
Q&A
Please Sign In if you have a question or want to post an answer.
Asked by Stan, March 30, 2016
Q: What size are the u-bolts (diameter and inside dimensions)?
⮞ 1 Answer
Answered by ☆ sales - March 31, 2016
A: The u-bolts are 1/2 diameter, and the inside dimension is 3 1/4.
PRODUCT REVIEWS
Shop popular categories
5 stars