Ford 9-inch 31-spline Rear Axles, 78-79 Bronco, 73-79 F150 SKU: 798600NET
Ford 9-inch 31-spline Rear Axles, 78-79 Bronco, 73-79 F150
Product Overview:
Ready to install bolt in 31 spline axle set for full size Bronco 78-86 and F100/150 73-86
Full description
Rear Axles (PAIR) 31 Spline 78-79 Bronco 73-79 F100-150 4x4 right and left side 32" OAL
Made from 1541-H alloy, our tapered roller bearing axles handle the side loads and larger tires. Our axles come completely assembled - just pull them out of the box and install. Typical 73-78 retainer style is 1/2" holes as shown below. Typical 79 retainer is 3/8" holes as shown below.
Q&A
Have a question? Click Here to submit your question.
Asked by Anonymous, March 3, 2022
Q: are these axels stronger than OEM axels?
Answered by ☆ sales - March 3, 2022
A: Yes, these are Made from 1541-H alloy, and our tapered roller bearing axles handle the side loads and larger tires.
Asked by mike smith, December 8, 2020
Q: What is the diameter of the flange face? looking for axles for a rear disc set
Answered by ☆ sales - December 8, 2020
A: The outside diameter is 6.653.
Asked by Anonymous, December 23, 2017
Q: What is the bolt pattern on these axles
Answered by ☆ sales - December 26, 2017
A: Our 798600 axles are 5x5.5 bolt pattern.
Asked by Anonymous, February 18, 2017
Q: Please what is the length of these, from the flange face to the end of the spline thank you.
Answered by ☆ sales - February 28, 2017
A: The axles are approximately 32 from face to end of spline.
Asked by Anonymous, August 26, 2016
Q: Do these axles come with a warranty
Answered by ☆ sales - August 26, 2016
A: They do not have a specific warranty, however, if you experience a mid shaft failure, we will replace it. The bearings or other wear items would not be covered.
Asked by Jason, June 22, 2016
Q: Do these include the race that goes inside the axle tube for the tapered bearings?
Thanks!
Answered by ☆ sales - June 24, 2016
A: Yes it is complete.
Asked by Daniel, March 17, 2016
Q: Do these axles use the a20 style bearings? Do they come with the stock style four bolt retaining plate, or do I have to buy some kind of aftermarket u shape style? How long are the axles? From what I have seen, they should both be about 31.843 inches long.
Answered by ☆ sales - March 17, 2016
A: The axles use a set 20 tapered roller bearing. They do come with 4 bolt heavy duty retaining plates for a no hassle install. The axles are stock length, just under 32 long.