Your Cart (0)
Front Disc Brake Overhaul Kit (No Caliper Brackets), 76-77 Bronco SKU: 3001NET
Front Disc Brake Overhaul Kit (No Caliper Brackets), 76-77 Bronco
Front Disc Brake Overhaul Kit (No Caliper Brackets) 76-77 Bronco
Product Overview:
Completely renew your 76-77 Bronco front disc brakes. Our kit includes all the main parts from the spindle out (Lock nut/washer and adjusting nut sold separately). You get 2 new spindles, wheel bearings, races, seals, rebuilt calipers, brake pads, caliper hardware, assembled hubs and rotors with new studs, and brake hoses. This kit fits stock 76-77 Bronco Dana 44 knuckles. Will also fit '78 and '79 Broncos/F150's except for the caliper hoses.
Full description
Completely renew your 76-77 Bronco front disc brakes. Our kit includes all the main parts from the spindle out (Lock nut/washer and adjusting nut sold separately). You get 2 new spindles, wheel bearings, races, seals, rebuilt calipers, brake pads, caliper hardware, assembled hubs and rotors with new studs, and brake hoses. This kit fits stock 76-77 Bronco Dana 44 knuckles. Will also fit '78 and '79 Broncos/F150's except for the caliper hoses.
Completely renew your 76-77 Bronco front disc brakes. Our kit includes all the main parts from the spindle out (Lock nut/washer and adjusting nut sold separately). You get 2 new spindles, wheel bearings, races, seals, rebuilt calipers, brake pads, caliper hardware, assembled hubs and rotors with new studs, and brake hoses. This kit fits stock 76-77 Bronco Dana 44 knuckles. Will also fit '78 and '79 Broncos/F150's except for the caliper hoses.
California residents: Proposition 65 Warning
Q&A
Have a question? Click Here to submit your question.
Asked by Gary Lynne Richey, March 17, 2022
Q: do you have a complete kit that includes all of the hard stainless lines as well as the flex lines in stainless? Essentially all of the brake lines/hoses? Thanks
⮞ 1 Answer
Answered by ☆ sales - March 17, 2022
A: No, not a 1 part # kit that covers everything. You would need #3191, 1459 67-77. The 3001 kit includes the caliper lines. Depending on what you have for a Master cylinder or power brake setup, you may consider #3077 as well.
Asked by Chris, January 22, 2017
Q: I just picked up a 75 dana 44 hp open knuckle drum brakes will this work on the high steer reid racing knuckles if trying to convert to disc brakes
⮞ 1 Answer
Answered by ☆ sales - January 23, 2017
A: You will still need to get caliper brackets. These are not included in the kit. Otherwise, yes, this kit will work with the 5 bolt spindle, Dana 44 Reid knuckles.
Asked by Michelle, June 16, 2016
Q: Installed the Front Disc Brake kit with new portioning valve #3037, bled the lines as directed and still the brake pedal goes to the floor. We also installed the Heavy Duty Master Cylinder at same time.
⮞ 1 Answer
Answered by ☆ sales - June 20, 2016
A: If you did not bench bleed the master cylinder, you will definitely need to. They can hide a lot of air. If you did bench bleed the master cylinder, try doing it again. There is a good video on our site under part # 3079.
PRODUCT REVIEWS
Shop popular categories
5 stars