Drop Pitman Arm, 67-75 Ford Bronco SKU: 1275

Drop Pitman Arm, 67-75 Ford Bronco

Drop Pitman Arm 66-75 Bronco

Product Overview:

Ensure your lifted Bronco’s steering performs at its best with the Drop Pitman Arm, specifically designed for Broncos with 3" or greater suspension lifts. This pitman arm is essential for aligning your steering drag link at the proper angle, preventing excess wear on your ball joints and improving overall handling. With its fully indexed design allowing installation in 10-degree increments, this drop pitman arm offers precise adjustment to keep your steering centered and responsive. Perfect for lifted 1967-75 Ford Broncos, this upgrade ensures smooth and reliable steering on and off the trail.

Fits 67-75 Ford Bronco
Replaces Stock Manual Steering or Power Steering Pitman Arm

Full description

Fits 67-75 Ford Bronco
Replaces Stock Manual Steering or Power Steering Pitman Arm

1967-75 Ford Bronco Drop Pitman Arm

After years of filing more pitman arm key ways than you can shake a stick at, we developed this fully indexed pitman arm. This custom drop pitman arm can be installed at 10-degree increments, helping you easily center your steering right to left. Designed specifically for Broncos with 3" of lift or more, this pitman arm ensures your drag link operates at the correct angle, reducing wear and tear on your ball joints and enhancing overall steering performance.

Unlike most pitman arms that can only be installed in one position on the steering box sector shaft, ours offers versatility and precision, making it easier to fine-tune your steering.

Fitment: 1967-75 Ford Bronco
Installation: Fully indexed, allowing installation at 10-degree increments
Recommended for: Broncos with 3" of lift or more for proper drag link angle
Steering Improvement: Helps maintain proper drag link geometry to prevent ball joint wear
Important Note: Not required for F-100 steering box conversions.

Technical Note:

There were four different pitman arms found on the Early Bronco. This Drop Pitman Arm replaces the two most common versions (67-75 Bronco Manual Steering Pitman Arm & 72-75 Bronco Power Steering Pitman Arm).

See below for clarification on the different pitman arms used on classic Broncos:

1966 Ford Bronco Pitman Arm
- Small taper at drag link end (0.700" at widest opening)
- Narrow center section for use with Manual Steering only.
1967-75 Ford Bronco Pitman Arm - Manual Steering
- Large taper at drag link end (0.763" at widest opening)
- Narrow center section for use with Manual Steering only.
1972-75 Ford Bronco Pitman Arm - Power Steering
- Large taper at drag link end (0.763" at widest opening)
- Thick center section for use with Power Steering
1976-77 Ford Bronco Pitman Arm
- Small taper at drag link end (0.700" at widest opening - same as 1966)
- Thick center section for use with Power Steering

California residents: Proposition 65 Warning

Q&A

Please Sign In if you have a question or want to post an answer.

Asked by milton d carley, June 17, 2021

Q: My Bronco has an aftermarket power steering box put on by the previous owner. It does not look like a Ford steering box and the pump looks like the GM ham can pump. Would this arm fit the aftermarket conversion steering box?

⮞ 1 Answer

Answered by ☆ sales - June 18, 2021

A: The pitman arm will fit most Bronco conversion boxes. You could also give us a call or email some pictures of your steering box, and we can try to determine what you have, and better say.

NEED HELP? Talk to a BRONCO expert today! (209) 400-7200

PRODUCT REVIEWS

Daniel Ruiz

Reviewed 07/31/2021

Goood product

Olddude6

Reviewed 09/08/2020

I was having Bump Steer issues. I contacted the Wild Horses team, sent photos and the Technical crew diagnosed the issue and prescribed a solution. My new drop pitman arm, the Trac Bar Riser, and the adjustable Trac bar work well together. Now when the old Bronco hops it travels on a straight forward line.

Jerry Perez

Reviewed 08/18/2020

Fit as it should and worked very well much better than stock

Larry Stewart

Reviewed 06/15/2019

Two thumbs up. Easy installation. Looks great.

DENNIS SULLYBROOK

Reviewed 06/23/2018

Works great , being able to make one spline adjustments makes it very easy to center on the steering box. Nice part.

Brian F

Reviewed 05/25/2017

Just what I needed to make my steering much better. Great quality and finish.

66 Bronco Man

Reviewed 11/26/2016

fit perfectly, good price.

redmaro42

Reviewed 09/30/2016

I needed this to correct my alignment on my bronco, fitment was superb and part was well built, worked as advertised

1970 Bronco

Reviewed 09/24/2016

Great quality, easy to install, would buy again

Jeremy

Reviewed 07/13/2016

Products were heavier duty than anticipated. The package arrived timely enough. I wish there was a lower drop on the pitman arm but the quality is good. The guys at wild Broncos were awesome. Hands down, best customer service anywhere.

azclassic

Reviewed 10/16/2014

Nice heavy duty piece. The non-indexing splines allowed the steering box to be centered with a 6" lift

jim risner

Reviewed 08/11/2014

very happy with the products i have ordered.. speedy shipping too..

J.D.

Reviewed 03/11/2014

Does what it needs to do

Crobinson

Reviewed 03/26/2013

Just as expected

74 bronco man

Reviewed 10/29/2012

Great product very tough and dont have to worry about the factory pitman arm binding up since i put the lift on when i called them to order it they are very nice wildhorses has my business for as long as i own broncos