Your Cart (0)
Metal Fuel Filler Neck, Main (Rear) Tank, 66-76 Bronco SKU: 9727
Metal Fuel Filler Neck, Main (Rear) Tank, 66-76 Bronco
Metal Fuel Filler Neck Main (Rear) Tank 66-76 Bronco
Product Overview:
66-76 Fuel Filler Neck for Main Tank (Rear). Use 71-76 long reach cap.
Full description
66-76 Fuel Filler Neck for Main Tank (Rear). Use 71-76 long reach cap.
66-76 Fuel Filler Neck for Main Tank (Rear). Use 71-76 long reach cap.
California residents: Proposition 65 Warning
Q&A
Have a question? Click Here to submit your question.
Asked by Mark, September 2, 2023
Q: Is there an inside gasket that goes between the top flange and the quarter panel? What type of fastener do you use to hold secure the unit to the quarter panel? What length should the filler hose be? Thanks!
⮞ 1 Answer
Answered by ☆ sales - September 15, 2023
A: There is no gasket between the filler neck and body. The filler neck is attached to the body with 3 sheet metal screws. Our filler hose, #9706 is cut to length. You would need to measure yourself, for your specific installation. Normally 12 or less.
Asked by Gary Richey, September 23, 2020
Q: I have a 77 and am replacing the lower quarters and at the same time removing the reserve tank. I do not want to use the filler door for the new quarter. Will this part allow me to go to the 76 and prior style filler with exposed cap? I am also installing your 23 gallon tank with EFI pump. Thanks!
⮞ 1 Answer
Answered by ☆ sales - September 24, 2020
A: Yes, you will want this neck, the 71-76 style gas cap, vent hose and a 1.75 to 1.75 fill hose.
Asked by Chad Klapper, April 3, 2020
Q: I have a 1976 Ford F150 Ranger XLT and has a single gas ank and cap. Will this fit my truck?
⮞ 1 Answer
Answered by ☆ sales - April 3, 2020
A: No, this is only designed for the 66-76 Bronco. It is not meant to fit any other model.
Asked by SHAWN DOUGHERTY, December 26, 2019
Q: What size filler hose would I need for this tube to mate with your stainless tank?
⮞ 1 Answer
Answered by ☆ sales - December 27, 2019
A: You would use a 1.75 x 1.75 filler hose.
Asked by Martyy Cole, November 30, 2019
Q: I have an after market 25 gallon Fuel Tank I Bought from WH and the stock Fuel Filler neck is to low for a straight shoot into the tank do you sell a Fuel Filler Neck that is Shorter or has less drop.
⮞ 1 Answer
Answered by ☆ sales - December 4, 2019
A: We only have the stock replacement filler necks available, nothing custom or shorter unfortunately.
PRODUCT REVIEWS
Shop popular categories
4,75 stars