Secure Checkout

Rear Fuel Tank Filler Hose, 66-76 Bronco SKU: 9706

Rear Fuel Tank Filler Hose, 66-76 Bronco

Rear Fuel Tank Filler Hose, 66-76 Bronco

Rear Fuel Tank Filler Hose 66-76 Bronco
Purchase Rear Fuel Tank Filler Hose, 66-76 Bronco
$14.99 SKU: 9706
Fits 66-76 Ford Bronco
14 Reviews
Choose Size:

Product Overview:

Replacement fuel filler hose for 1966-77 Ford Bronco rear main gas tanks. This fuel-rated rubber hose connects the metal fuel filler neck to the fill spout on the rear main fuel tank of your classic Ford Bronco.

To ensure you get the correct fuel hose for your early Bronco, we have provided both the hose ID measurement and the typical application of each hose. If you are unsure which fuel filler hose you need for your Ford Bronco, please measure the outside diameter (OD) of your current fuel filler neck and fuel tank filler spout. Please call if you have any questions.

Full description

Replacement fuel filler hose for 1966-77 Ford Bronco rear main gas tanks. This fuel-rated rubber hose connects the metal fuel filler neck to the fill spout on the rear main fuel tank of your classic Ford Bronco.

To ensure you get the correct fuel hose for your early Bronco, we have provided both the hose ID measurement and the typical application of each hose. If you are unsure which fuel filler hose you need for your Ford Bronco, please measure the outside diameter (OD) of your current fuel filler neck and fuel tank filler spout. Please call if you have any questions.


Early Bronco Fuel Tank Filler Hose

Replace the old fuel filler hose on your 1966-77 Ford Bronco rear main tank with a new fuel-rated filler hose from WILD HORSES.

Typical Early Bronco Fuel Filler Hose Dimensions

  • 66-76 Ford Bronco: 1.75" ID Straight Hose
  • 1977 Ford Bronco (Factory Tank): 2.00" ID x 2.25" ID Tapered Hose
  • 1977 Ford Bronco (23 Gallon Tank): 1.75" ID x 2.25" ID Tapered Hose

We also offer a 2.00" ID straight hose which is useful for some aftermarket fuel tanks.

If you are unsure which hose your Bronco needs, you may want to check the O.D.(outside diameter) of your fuel tank fill tube to be sure you are ordering the correct one. Most Broncos will use the 1.75 X 1.75" or 1 3/4" hose. Some replacement tanks use the 2.00 X 2.00" or 2" hose. The '77 Broncos usually use the 2.00 X 2.25" but if an aftermarket tank is installed, it may need a 1.75 X 2.25" hose.

When you install a body lift, the rear stock fuel tank stays with the frame as the body moves up. Because of this, the filler hose should be replaced to prevent stretching which can lead to failure of the hose. Sometimes you can get away with leaving the stock hose in place but once you get a 2-3" body lift, we recommend changing it at the time of the body lift installation. The side tank moves up with the body and therefore does not need to be changed.
This hose is 12" long.
Review Rear Fuel Tank Filler Hose, 66-76 Bronco

California residents: Proposition 65 Warning

Q&A

Have a question? Click Here to submit your question.
Know the answer? Add it here.


Your question will be published after review.


Asked by Gordon, January 1, 2022

Q: Which filler hose do I need for the M1A1 tank?

1 Answer

Answered by sales - January 3, 2022

A: The M1A1 takes 1.75. 66-76 Broncos are normally the same as well, 1.75. 77's are different, requiring a reducer from 2.25 at the body, to 1.75 at the tank.

Know the answer? Add it here.

Know the answer? Add it here.

Asked by Wayne, October 14, 2015

Q: Installing WildHorses 1 body lift. Is this hose longer than stock to accommodate 1 body lift?

1 Answer

Answered by sales - October 14, 2015

A: The 9706 should be plenty long. It is 12 overall.

Know the answer? Add it here.

Know the answer? Add it here.

PRODUCT REVIEWS
Ken McBride
Reviewed 01/04/2023
perfect fit when upgrading tank

Kyle
Reviewed 07/13/2022
The filler tank hose was exactly what I need and arrived quickly. It was long enough for various lift heights and was easy to cut down to size.

Ken Laird
Reviewed 05/15/2019
This part is industrial strength! It comes long enough for high body lifts. You will likely have to trim it down. I have a 2 inch body lift and I had to. Also, get some good strong clamps, not the cheapie ones. They have to be strongly clamped on both ends to not leak. It is good advice to always buy this part if you drop your fuel tank. Old ones tend to get mauled when taking things apart. I learned this the hard way.

Michelle Lomier
Reviewed 10/26/2018
Better than I expected. Really good bargain for the money. Easy to install.

Arnie Parks
Reviewed 04/30/2018
Perfect fit!!

Todd
Reviewed 03/29/2018
Fit perfect. Easy install. No leaks

Matt Quaresma
Reviewed 09/08/2017
I really like how it is longer than needed. Makes it really easy to measure the length needed and then cut. Great product.

Shane San Miguel
Reviewed 08/29/2017
Fit perfectly on the stock rear tank on my 1971.

Marty Cole
Reviewed 08/21/2017
Received quickl. I have not yet installed this one yet but have used this product before with no problems. It can be a little tough to get in but it is not impossible

Jason Justice
Reviewed 06/10/2015
Very pleased with my purchase. Had to wait on the product that was back ordered but well with the wait.

C Jennings
Reviewed 01/25/2015
Nice fit, works great

Colin
Reviewed 05/02/2014
Hose fit good, no problems.

Bkjells
Reviewed 05/16/2013
Just as described, good packaging, and quick shipping! - as always! Thanks again. Would have been nice to throw a couple hose clamps in though.

J.Y
Reviewed 02/20/2013
Seems to be a quality product hose was longer than needed which is great so you can cut to fit. will probably order another set for my other bronco soon.


Shop popular categories
4,93 stars