Hub Seal, 66-68 Ford Bronco SKU: 8832
Hub Seal, 66-68 Ford Bronco
Product Overview:
High quality replacement wheel bearing hub seal for your 66-68 Ford Bronco Dana 30 front axle. This seal mounts on the backside of the front wheel bearing hub. Each Bronco requires two seals, one per wheel bearing hub.
Please note, some early Bronco Dana 30 front ends used the Dana 44 style hub seal. Which seal you will use is dependent upon the wheel hub installed on your Bronco. The easiest way to tell which hub seal you need is to look at the thickness of the current seal. This seal is approximately 1/4" thick whereas the Dana 44 style seal is nearly 1/2" thick.
Full description
High quality replacement wheel bearing hub seal for your 66-68 Ford Bronco Dana 30 front axle. This seal mounts on the backside of the front wheel bearing hub. Each Bronco requires two seals, one per wheel bearing hub.
Please note, some early Bronco Dana 30 front ends used the Dana 44 style hub seal. Which seal you will use is dependent upon the wheel hub installed on your Bronco. The easiest way to tell which hub seal you need is to look at the thickness of the current seal. This seal is approximately 1/4" thick whereas the Dana 44 style seal is nearly 1/2" thick.
Dana 30 Hub Seal for 66-68 Ford Bronco
High quality replacement wheel bearing hub seal for your 66-68 Ford Bronco Dana 30 front axle. This seal mounts on the backside of the front wheel bearing hub. Each Bronco requires two seals, one per wheel bearing hub.
Please note, some early Bronco Dana 30 front ends used the Dana 44 style hub seal. Which seal you will use is dependent upon the wheel hub installed on your Bronco. The easiest way to tell which hub seal you need is to look at the thickness of the current seal. This seal is approximately 1/4" thick whereas the Dana 44 style seal is nearly 1/2" thick.